6/20/2023 0 Comments Boinc host locationIn this mode, the VM shares the IP address of the host machine in order to make outgoing connections This will work if your network has a DHCP server configured toĪt this point, for the network changes to take effect, you may want to restart the Linux VM: To do this, edit /etc/network/interfaces to include: We don't recommend this because clients will get confused if the IP address changes. You won't need a proxy to resolve a local address.Īlternatively, you can get an IP address via DHCP. If you're using a proxy to access the internet you should add 'boinc-server' to your list of exceptions in your browser. With this you can connect a client from your host machine to your VM. To do this edit C:\Windows\system32\drivers\etc\hosts (if the host is Windows) or /etc/hosts (as root if the host is Unix) with an editor, and add for example: You should also add the IP address and hostname of the VM to your hosts file. Where a.b.c.d is the DNS server IP address Where a.b.c.d is your DNS server IP address (you can supply more than one). To do this, edit /etc/network/interfaces. We recommend that you give the VM a static IP address. University networks, eduroam), you have to use NAT mode for this. This mode is not be possible in networks that use MAC based security (e.g. Outgoing and incoming connections are possible. Scanning the network will reveal two machines, your host and the VM. In this mode, the VM will act like a separate machine on your network. General info about network configuration under Debian is in the SUBSYSTEM="net", ACTION="add", DRIVERS="?*", ATTR="1", KERNEL="eth*", NAME="eth1"ĭelete the line that ends with NAME="eth0" and rename eth1 to eth0. # line, and change only the value of the NAME= key. # You can modify it, as long as you keep each rule on a single # This file was automatically generated by the /lib/udev/write_net_rules cloning the VM) you also have to edit the file /etc/udev/rules.d/les after first startup of the VM. If you somehow change the MAC address of the VM (e.g. We recommend that you start with Bridged Ethernet. Please power down the VM before changing this value. These are selected in the configuration section of the VirtualMachine. VirtualBox provides two ways to access the network from the VM:īridged Ethernet and NAT (Network Address Translation). The "sudo" command is available as user "boincadm" and there is an OpenSSH server running by default.This VM has 2.4 installed, so you need to change the file a bit (instructions included). The project httpd config created by default contains configuration for Apache 2.2.Please change the mirror locations in /etc/apt/sources.list before upgrading to a location near you! If you want the latest version, use 'apt-get update' and 'apt-get upgrade'. The Linux/PHP/MySQL/Apache software on this VM is not necessarily the latest version.The mod_cgi apache module is by default disabled and need to be enabled ( sudo a2enmod cgi) before creating the first project.The BOINC software on this VM is not necessarily the latest version.There is a user account 'boincadm' with password 'boincadmpw' build software under this account. The passwords can be found in the file README-vbox-image that is part of the zip file.Thanks to Christian Beer for creating this. The BOINC software version is from 27 September 2015. It is a 64-bit image you need a 64-bit processor to run it. The VM image is for VirtualBox, an open-source VM system. It's ready to run ~/boinc-src/tools/ make_project and go. It has all the BOINC server prerequisites installed, the BOINC software installed and compiled,Īnd user accounts and permissions set up. Use CTRL-] then "quit" to exit telnet.Note: This is a very OLD VM that is no longer running software that gets security updates If you do not see that message suspect firewall or network problem. Pressing CTRL-C should generate an error message such as "" plus other stuff. If each system can ping each other then try a telnet connection from the boinctasks system to the client Installing boinctasks under windows should automatically ask to allow access through the firewall. I assume it is also running boinc (but not boincmgr)Ĭ:\Program Files\boinc>boinccmd -host YOUR_REMOTE_SYSTEM -get_host_info Make sure that each system can "ping" the other using system names else network problem.įrom the system running the client, from an admin command prompt do the following:Ĭ:\Program Files\boinc>boinccmd -get_host_infoĭo the same thing from system running boinctasks. If client is in windows make sure there is only one client running and that the manager is not running. If Linux then at /etc/boinc-client you need to edit the file remote_hosts.cfg and add the name of the boinctasks system or its IP address.
0 Comments
Leave a Reply. |